4500 and evo 12inch

can anyone tell me the best settings for this combo please. I use the standard 8inch minelab without a problem but find the evo quite noisy

Hi peter_s, you've got your RX gain, your stabilizer and your audio to play with to make it quieter. Personally but this is only my own preferences, I would move the audio from normal to quiet and if that doesn't quieten it enough, I would then move the stabilizer from 10 down to 8 and lastly, although I myself like to keep the gain up, I would attempt moving that gain down a notch or two. As I mentioned, this is just my preferred order and I'm sure other's opinions may vary.

You may find a few hints here?


http://www.minelab.com/treasure-talk/gpx-audio-controls

Hi mate we use both 15 and 12 evo on 4500 in the gt my settings are audio normal , signal 18, target volume 12, target limit 18,motiom slow ,rx and stab 9,i like to run the response in inverted my mother using the 12 prefers normal, audio tone if you have done shooting or worked in a noisy work place normally you will have hearing damage as I have 42 I find works for me regards john

thanks for the replies will try them out this arvo

Pete