GPZ19 coil and images placed on my FB business page
+13
kevlorraine2
Jay Gold
kon61
Martin R
Reg Wilson
robby_h
kiwijw
Cadian
Magilla
slimpickens
rockhunter62
Harb
GypsyGoldAu
17 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: GPZ19 coil and images placed on my FB business page
I think the mods do a great job and should keep locking/removing posts to keep a good culture on the forum. Pity JP that you must waste good detecting time to comment on posted rubbish instead of posting with your advice/finds/tips.
Busting until Monday so I can swing the 19 inch coil over some deep ground that has produced in the past.
JP.....Any suggestions on settings that would be a good starting point for the 19 coil for larger slugs in deep ground (+ 2 feet), with fairly standard Low-moderate noisy ground??
cheers Tributer
Busting until Monday so I can swing the 19 inch coil over some deep ground that has produced in the past.
JP.....Any suggestions on settings that would be a good starting point for the 19 coil for larger slugs in deep ground (+ 2 feet), with fairly standard Low-moderate noisy ground??
cheers Tributer
Tributer- Contributor Plus
- Number of posts : 1006
Registration date : 2008-10-27
Re: GPZ19 coil and images placed on my FB business page
Tributer wrote: Busting until Monday so I can swing the 19 inch coil over some deep ground that has produced in the past.
JP.....Any suggestions on settings that would be a good starting point for the 19 coil for larger slugs in deep ground (+ 2 feet), with fairly standard Low-moderate noisy ground??
cheers Tributer
Keep an eye on the Minelab web site, I'm polishing up a Treasure Talk blog as we speak.
JP
Re: GPZ19 coil and images placed on my FB business page
Jonathan Porter wrote:
........ a big part of proof of concept was to find gold and now I'm being criticized for it!! Go figure.
JP
Hi JP, do you really believe that you have been criticized for finding gold?
llanbric- Contributor Plus
- Number of posts : 415
Registration date : 2008-11-17
Re: GPZ19 coil and images placed on my FB business page
Never mind Jonathon, there are pros and cons with being ML's 'golden boy'. Having been there, done that, I enjoy the indepedance that I now have, despite having to pay for my own detectors these days. You have to accept the fact that there is no shortage of envious dropkicks and knockers out there. A lot of these poor buggers have never found enough gold to fill a tooth, and find it difficult to accept the fact that it is there own fault.
As long as you have this close association with ML you will have no choice but to be polite with the losers, where as I have the luxury of just being able to tell them to 'go platt their poop.'
There is a positive side to being a crusty old digger who has reached the 'use by date', as far as ML is concerned, as you will undoubtedly discover one day. Almost all the people that I once knew at ML are all long gone, and it is a much larger and differrent company these days.
As long as you have this close association with ML you will have no choice but to be polite with the losers, where as I have the luxury of just being able to tell them to 'go platt their poop.'
There is a positive side to being a crusty old digger who has reached the 'use by date', as far as ML is concerned, as you will undoubtedly discover one day. Almost all the people that I once knew at ML are all long gone, and it is a much larger and differrent company these days.
Reg Wilson- Contributor Plus
- Number of posts : 629
Age : 76
Registration date : 2012-05-14
Re: GPZ19 coil and images placed on my FB business page
Reg Wilson wrote:Never mind Jonathon, there are pros and cons with being ML's 'golden boy'. Having been there, done that, I enjoy the indepedance that I now have, despite having to pay for my own detectors these days. You have to accept the fact that there is no shortage of envious dropkicks and knockers out there. A lot of these poor buggers have never found enough gold to fill a tooth, and find it difficult to accept the fact that it is there own fault.
As long as you have this close association with ML you will have no choice but to be polite with the losers, where as I have the luxury of just being able to tell them to 'go platt their poop.'
There is a positive side to being a crusty old digger who has reached the 'use by date', as far as ML is concerned, as you will undoubtedly discover one day. Almost all the people that I once knew at ML are all long gone, and it is a much larger and differrent company these days.
Reg Wilson,
I have no idea who you are frankly I don't care & you know nothing about me and probably all the people you refer to in your above comments which are more of an attack than anyone has made on JP in recent post's, you make some comments above about people that could be found offensive & shows a lack of respect from you toward anyone here that you perceive has made a negative comment toward JP.
If any of your comments are directed at me then I find it quite funny & proves that I have done the right thing !!!! hmmmm
rc62burke- Contributor Plus
- Number of posts : 2083
Age : 51
Registration date : 2009-03-05
Re: GPZ19 coil and images placed on my FB business page
Reg Wilson wrote:Never mind Jonathon, there are pros and cons with being ML's 'golden boy'. Having been there, done that, I enjoy the indepedance that I now have, despite having to pay for my own detectors these days. You have to accept the fact that there is no shortage of envious dropkicks and knockers out there. A lot of these poor buggers have never found enough gold to fill a tooth, and find it difficult to accept the fact that it is there own fault.
As long as you have this close association with ML you will have no choice but to be polite with the losers, where as I have the luxury of just being able to tell them to 'go platt their poop.'
There is a positive side to being a crusty old digger who has reached the 'use by date', as far as ML is concerned, as you will undoubtedly discover one day. Almost all the people that I once knew at ML are all long gone, and it is a much larger and differrent company these days.
Oh BTW moderation is conspicuous in its absence
rc62burke- Contributor Plus
- Number of posts : 2083
Age : 51
Registration date : 2009-03-05
Re: GPZ19 coil and images placed on my FB business page
Hey Lee, mate have a beer and get over it ay.
cheers dave
cheers dave
Guest- Guest
Re: GPZ19 coil and images placed on my FB business page
davsgold wrote:Hey Lee, mate have a beer and get over it ay.
cheers dave
Your shout then I'll have a carton of Carona.
rc62burke- Contributor Plus
- Number of posts : 2083
Age : 51
Registration date : 2009-03-05
Re: GPZ19 coil and images placed on my FB business page
rc62burke wrote:
Your shout then I'll have a carton of Carona.
Ha Ha , in Moderation, ay.
cheers dave
Guest- Guest
Re: GPZ19 coil and images placed on my FB business page
Mexican beer??? Weak and tasteless.
Reg Wilson- Contributor Plus
- Number of posts : 629
Age : 76
Registration date : 2012-05-14
Re: GPZ19 coil and images placed on my FB business page
Come on Lee, you are giving us North Queenslanders a bad name. We are not unedumacated bogans . I think you meant "Corona" beers. We are all partial to a cold drink up here.
Cheers
Doug
Cheers
Doug
rockhunter62- Contributor Plus
- Number of posts : 271
Age : 62
Registration date : 2016-03-07
Page 2 of 2 • 1, 2
Similar topics
» GPZ14 against GPZ19 coil plug
» Business opportunity, Qld Property
» 4G PROSPECTING - NEW BUSINESS IN WA
» Has anyone had dealings with this business in Sydney?
» Nugget Finder 12" Z Search coil compared to Minelab 14" coil on GPZ 7000
» Business opportunity, Qld Property
» 4G PROSPECTING - NEW BUSINESS IN WA
» Has anyone had dealings with this business in Sydney?
» Nugget Finder 12" Z Search coil compared to Minelab 14" coil on GPZ 7000
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum