Gold Detecting and Prospecting Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

6" DD coils for the Xterra 70

2 posters

Go down

6" DD coils for the Xterra 70 Empty 6" DD coils for the Xterra 70

Post  hugh62 Sun Aug 03, 2014 8:36 pm

Anyone useing them , 6" DD coils the 3 & 17 khz range , espically around gold fields ,( their ability to discriminate the tinest rubbish ,minerilisation ,and non ferrous target sizes ) Cheers Hugh62   Smile
hugh62
hugh62
Contributor Plus
Contributor Plus

Number of posts : 363
Age : 62
Registration date : 2014-02-09

Back to top Go down

6" DD coils for the Xterra 70 Empty Re: 6" DD coils for the Xterra 70

Post  philski Wed Oct 08, 2014 8:50 pm

Hi

i mostly look for gold so only have high frequency coils, the 3 kHz is not recommended on gold.

In trashy areas. The 18.75 kHz coiltek 6 inch is easily my prefered choice of coil for the x terra by miles. It has found match head sized gold in areas heavily gone over by GPX 5000s, ATX's and a whole host of other machines. It is also small enough to act as a pinpointer, so you may pay $300 for the coil. but save yourself $185 on a pinpointer.

If your after maximum depth the 15 inch WOT coil is the bee's knees on the minelab x terra. I use both, one to broad scan and identify. The other to pinpoint and dig.

The coiltek coils are better than anything minelab produce.

hope that helps.
Phillip
philski
philski
Good Contributor
Good Contributor

Number of posts : 82
Age : 56
Registration date : 2012-05-03

http://www.tas-prospecting.com

Back to top Go down

6" DD coils for the Xterra 70 Empty Re: 6" DD coils for the Xterra 70

Post  hugh62 Wed Oct 08, 2014 10:26 pm

Thanks for that .Cheers hugh62.
hugh62
hugh62
Contributor Plus
Contributor Plus

Number of posts : 363
Age : 62
Registration date : 2014-02-09

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum