Retard question about gps coordinates
5 posters
Page 1 of 1
Retard question about gps coordinates
Ok,so i am about to destroy something from sheer frustration
i have these coordinates 374000E 6644000N written just like that....now how does a retard like myself get that to work in google earth??
any help would be helpfull........
i have these coordinates 374000E 6644000N written just like that....now how does a retard like myself get that to work in google earth??
any help would be helpfull........
goldleaf- Contributor
- Number of posts : 22
Registration date : 2012-04-20
Re: Retard question about gps coordinates
Hi
try here http://users.tpg.com.au/adslly6v/UtmGoogleStreetView.html , you use the x y co-ordinates. you will need your utm zone as well which you can find here http://www.herpnet.org/herpnet/gbif/World_UTM_Map.pdf
hope this helps.
cheers
try here http://users.tpg.com.au/adslly6v/UtmGoogleStreetView.html , you use the x y co-ordinates. you will need your utm zone as well which you can find here http://www.herpnet.org/herpnet/gbif/World_UTM_Map.pdf
hope this helps.
cheers
markHH64- Contributor
- Number of posts : 29
Age : 52
Registration date : 2011-04-22
Re: Retard question about gps coordinates
It should be pretty easy.
37.40000E, 66.440000N there may a number missing from it though.
This one puts you somewhere near Murmansk! Is that where you want to be?
The coordinates come up as 66.440000N 37.40000E
37.40000E, 66.440000N there may a number missing from it though.
This one puts you somewhere near Murmansk! Is that where you want to be?
The coordinates come up as 66.440000N 37.40000E
crocky111- Contributor
- Number of posts : 38
Age : 73
Registration date : 2012-05-17
Re: Retard question about gps coordinates
Hi Goldleaf, Go to Google Earth and click on TOOLS in the top left corner. Then click on OPTIONS. Then click on UNIVERSAL TRANSVERSE MERCATOR . Then click on OK. Job done, cheers Pete.
piston broke- Contributor Plus
- Number of posts : 1633
Age : 65
Registration date : 2011-05-07
Re: Retard question about gps coordinates
cheers for the help guys,
i managed not to destroy anything with my tantrum
i was trying to input the gps co ordinates from doug stones book....very frustrating,is it like secret code or something lol
the co ords i gave were suppose to be Gindalbie in West Aus.
i tried the utm setting also and that does not help.
its really daft the way the co ords are written in the book pretty much just like this 374000E 6644000N nothing else?very confusing and enraging
anyway i am a Kalgoorlie local so i have plenty of time to just get out there and find it!
Thanks all
i managed not to destroy anything with my tantrum
i was trying to input the gps co ordinates from doug stones book....very frustrating,is it like secret code or something lol
the co ords i gave were suppose to be Gindalbie in West Aus.
i tried the utm setting also and that does not help.
its really daft the way the co ords are written in the book pretty much just like this 374000E 6644000N nothing else?very confusing and enraging
anyway i am a Kalgoorlie local so i have plenty of time to just get out there and find it!
Thanks all
goldleaf- Contributor
- Number of posts : 22
Registration date : 2012-04-20
Re: Retard question about gps coordinates
Hi GoldLeaf,
Do what Piston Broke suggests.
Assuming your zone is 51J
In Google Earth click "Add place mark" little yellow pin in top tool bar.
A new place should appear on your view.
Right click on this place mark
click "Properties"
Clear the co-ordinates in the N & E box
In the E box type 374000
In the N box type 6644000
Click apply and you will see the new place mark moves to the applied co-ordinates.
Click Tools then options again
Select degrees, minutes & seconds
Click apply
Right click on your new place mark again
Click properties and you should see this.
30°19'45.38"S
121°41'21.48"E
These co-ords will bring you adjacent to Lindsay's Mine off the Yarri Road approx 50km's NE of Kal.
Cheers
Peter
Do what Piston Broke suggests.
Assuming your zone is 51J
In Google Earth click "Add place mark" little yellow pin in top tool bar.
A new place should appear on your view.
Right click on this place mark
click "Properties"
Clear the co-ordinates in the N & E box
In the E box type 374000
In the N box type 6644000
Click apply and you will see the new place mark moves to the applied co-ordinates.
Click Tools then options again
Select degrees, minutes & seconds
Click apply
Right click on your new place mark again
Click properties and you should see this.
30°19'45.38"S
121°41'21.48"E
These co-ords will bring you adjacent to Lindsay's Mine off the Yarri Road approx 50km's NE of Kal.
Cheers
Peter
Last edited by Nightjar on Sun Jul 01, 2012 9:57 am; edited 1 time in total (Reason for editing : Correction)
Similar topics
» Understanding GPS Coordinates
» OZI question
» How to understand map references.
» map coordinates for Baby Endeavour Mine Combienbar
» New Mods for Minelabs
» OZI question
» How to understand map references.
» map coordinates for Baby Endeavour Mine Combienbar
» New Mods for Minelabs
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum