Best settings for 4500 using a 14" coilteck elite mono

Hi everyone

Just wondering what settings are best for the gpx4500 using a 14" coilteck elite mono please .
Most work will be in north QLD

Thanks
Wayneo

Wayne start out with factory default,Enhance and Mono coil selection and normal not deep on the front switches.I'm using the 4500 and 14" Elite at the moment and use Rx 8 and Stabilizer 6 as my starting point as these coils are very sensitive to ground noise.Adjust your threshold to a nice smooth background hum and if you have Emi manually adjust the tuning a couple of notches as you go.
Don't be tempted to raise the Rx and Stab too high on these coils as they work exceptionally well and you will introduce unnecessary noise.
This is the settings I use for Victoria so I don't know if it is suitable for Queensland.

Thanks for that will give it a goo .

wayneo