Power lead end protector
4 posters
Page 1 of 1
Power lead end protector
Having nearly trodden on the connector end of the power cable I was unable to purchase any suitable end caps .So I made my own;cut a 35 mm piece of 1/2 inch diameter dripper tube [Bunnings] and squirt about 15 mm of roof silicone in , I take the nozzle off and use silicone directly from the cartridge .The bonus is that the tube keeps the end of the connector perfectly round and is easier to connect behind your back to the battery.It has been used by a number of my detecting mates and is well tested .
Roy- New Poster
- Number of posts : 4
Registration date : 2014-10-02
Re: Power lead end protector
Hej Roy,
picture speak thousand words.
Interested to see the result and sure most of the members.
Thanks,
GoldEN
picture speak thousand words.
Interested to see the result and sure most of the members.
Thanks,
GoldEN
Guest- Guest
Re: Power lead end protector
As requested, a couple of pics to show what I'm on about. They work well and protect the connection nicely.
Roy- New Poster
- Number of posts : 4
Registration date : 2014-10-02
Re: Power lead end protector
Good solution. I jambed mine in the car door & had a bit of fun reshaping it to fit the detector/battery again. But got there eventually.
Good luck out there
JW
Good luck out there
JW
kiwijw- Contributor Plus
- Number of posts : 1886
Age : 65
Registration date : 2010-09-02
Re: Power lead end protector
Yes, they are a bugger to fix and so easy to damage.
I use rubber chair leg protectors, and have them on all bare leads, coils included.
I use rubber chair leg protectors, and have them on all bare leads, coils included.
Redfin- Contributor Plus
- Number of posts : 679
Registration date : 2013-02-26
Re: Power lead end protector
Hi there Redfin, I got a coil......I think it was from Bendigo Gold.......& it came with a protector cap like that fitted on the end of the lead. Hadnt seen or heard of them before that. Good idea. Even for keeping dirt & muck out of the pin connectors.
Good luck out there
JW
Good luck out there
JW
kiwijw- Contributor Plus
- Number of posts : 1886
Age : 65
Registration date : 2010-09-02
Re: Power lead end protector
I do the same as Redfin (think it was posted before on the forum).
Clark Rubber
Size for cable end - 13mm
Size for control box GPX5000 - 16mm
Jaycar has rubber switch covers.
Cheers
Clark Rubber
Size for cable end - 13mm
Size for control box GPX5000 - 16mm
Jaycar has rubber switch covers.
Cheers
AnnieL- Contributor Plus
- Number of posts : 1084
Age : 69
Registration date : 2012-05-07
Similar topics
» Repairing power lead
» Lost Ferrite
» Detector protector for GPZ7000
» SDC2300 Quick 5 minute knuckle protector
» What would be good.. 2 coils off one machine
» Lost Ferrite
» Detector protector for GPZ7000
» SDC2300 Quick 5 minute knuckle protector
» What would be good.. 2 coils off one machine
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum