Reverse 5 Pin Power Cord

does anyone know ere you can get the 5 pin socket that the bungee cord plugs into the battery, chassis socket but a female one, they use them on the gpx4000 and the gpx4500.
thanks wheelie

Gday Wheelie. Welcome to the forum.

Ive never heard of a 5 pin bungee cord socket,but if your referring to the female 5 pin power cord lead socket,that plugs in to your battery pack,you'll find them at any Jaycar Electronics outlet for around $6 bucks each.

Cheers kon61.

i am after the socket the lead plugs into from the power to the battery

Reeds have them , Got two last year to fix my lucky lark from 3500= to a 4500. Had to turn the volt up as well..Hope this helps...

So you're after a Minelab 5 pin female battery box socket;Once again check with Jay car.

Cheers kon61.

Jaycar have them, brought 2 only a few weeks ago. About $3 from memory.
Regards

Any one have the Jaycar part number ?


Driller

when look at the battery it the socket on the battery is what i am after female socket
hope this explains it better
jaycar dont sell these they only have the male ones

goldhog22 wrote:Reeds have them , Got two last year to fix my lucky lark from 3500= to a 4500. Had to turn the volt up as well.....

Goldhog22 I thought about doing this to my Lucky lark, have you got a wiring diagram for this or it straight forward? or is it better buying the conversion lead from Reeds?

Regrds Johnny

jaycar four pin is $2-95 and p/n ps2012 so i suggest asking them as prob 2013,2014,regards mark

Hobo , Its just straight forward. I use a mm. There is a small pot in there that ups the volts to 8.2 ,out when finished.? Think i copied the wires from the batt. box for the 4500..??

i have searched everywhere for these parts can not find them apperently they are made in china and you have to bulk buy them does anyone know where.

Why dont you use 5pin pin panel socket from jaycar ps-0348 to take 5 pin premium diecast socket pp-0306 which are 1-65 and 3-75 respectively. You can always go for the amphenol harsh environment 6 pole connectors which are about 20-00 each plus about 14-00 ea. for dust plugs for both socket and skirt but dont really think they are necessary,they are pp and ps 1000- 1005

im actually making up spare battery packs for a few of my mates detectors so i want to keep it standard thanks anyway

Hello Wheelie23,
Yes, contact Reeds Prospecting, the business has changed hands however I would think they still have the 5 pin female.
[url] http://www.reedsprospecting.com.au/[/url]
The soldering set up is quite simple because the only reason Minelab changed to 5 pin for their GP series was to prevent anyone plugging their 8+ volts battery into a SD series lower voltage machine. (Two wires are actually soldered to one pin so in effect only 4 pins are actually active.

Good luck
Peter

thanks peter i got onto reeds earlier today they are going to sort out a couple for me thanks, i worked out that one pin did nothing when i pulled the old battery appart