Quick track button

Is there anybody who knows if you can just buy the quick track button for the GPX series instead of the whole handle assembly, cheers

This one does the jobe:

http://search.jaycar.com.au/search?w=SP-0656&view=list

Cheers

Thanks for that info. n/j

Be lucky.

Thank you Nightjar:) 

Hi NF
I recommend that you carry a spare handle in your kit as I have broken many a handle (way more than 10) both the button and the handle its self is prone to failure.
I would repair the one you have but I would also carry a spare.
I also change the armrest strap button thingys over to stainless bolts/nuts/washers as these are also prone to failure in the field.
Nothing worse than being in tha middle of fing nowhere and not having a spare.
Best to be prepared.

Hi!! Anybody got any clues as to how the Jaycar buttons wire up?? I bought one to replace a broken original on an old quick track set-up to use as a spare. I tried dissecting the old switch to see how it was connected up but couldn't get it apart so I cut it off. When I stripped the cable back, there were 4 wires inside it, (Yellow, blue, black and white). The Jaycar switch has 2 terminals.   
Any advice from someone in the know, as to which goes with which and what goes where would be truely appreciated.
Thanks,
Max.   

Hi Max,

Don't know which wires go where, but I know how you can find out. Grab a multimeter, see which wires are connected to each other(continuity check). They will be in pairs, so connect the continuous pairs together.

Cheers Mick

Thanks Mick. I'll give it a try. I imagine once I've got the pairs sorted, it should probably not matter which terminal each pair is connected to. I guess depressing the switch just connects the pairs to each other.
Cheers,
Max.

Spot on Max   
The reason 4 wires are used is for extra strength.

Cheers Mick

OK! Done that!
For future reference, looks like Black and Yellow are paired as are White and Blue.
Thanks again for your help Mick.
Cheers,
Max.

Cheers Max!

Will add that bit of info to my archive....

Cheers Mick