16" settings for GPX5000

Hi all,
I generally detect using the standard 11" coil. I'd like to now go over a patch with my 16" coil.
I'm looking for some recommended settings for this coil to start out with. Once I'm familiar with these settings, I'm happy to experiment to maximise penetration.
Any suggestions/recommendations gratefully accepted :-)
thanks in advance
Terry

Hi Bicter,
I think you will get more better/correct/setting response if you tell what kind of ground is it.

GoldEN

Thanks Golden,
generally the ground is quite mineralised, a mixture of ironstone, schist and quartz. It's quite noisy particularly in areas with high charcoal content.
The area in question is out the back of Warwick in Qld if that helps :-)

Gday Bicter
What soil timing are you able to run on the ground with your 11in

Hi Aurumpro,
running special fine, depending on the day RX gain can be between 9 & 14 stabiliser nominally 2-3 below RX until quiet
Is that the info you're after?

Yes mate.

What audio type are you using (Quiet, normal, deep, or boost).
And what color is the soil dose it have multiple layers

Running deep audio' ground is about 2" topsoil then into broken schist mixed with clay then about 6" down hit another layer of clay, to date really haven't found much deeper than 12 -16"

oky doky
What size is the patch and dose it grade into deeper ground.
Then you will get a PM with my suggested settings and a patch search technique.

What is the sizes and consistency of nuggets that you have already found on your patch (different targets Different approach)

Aurum,
private message sent

Hope the info helps ya mate
Let us know how you go.
AAATTTTAAACCCKKK