GT16000 Coils
4 posters
Gold Detecting and Prospecting Forum :: General :: All about Coils :: Coils - Minelab, Coiltek, General
Page 1 of 1
GT16000 Coils
What size stock coils and after market coils are available for this detector.
Will Penny- Number of posts : 1
Age : 76
Registration date : 2013-05-22
Re: GT16000 Coils
Hi, I only recall the standard being an 8" and you could also get an 11", not sure of other options as it's been a while and my memory isn't the best.
CostasDee- Management
- Number of posts : 3971
Registration date : 2010-11-23
Coils for GT16000 and Musketeers
Hi All,
Yes we used to manufacture a 15" coil for this range of detectors however this coil is now obsolete and there are not many left in stock. If you require one you will need to get in touch with your local dealer...
I hope this helps
Regards,
Trevor @ Coiltek.
Yes we used to manufacture a 15" coil for this range of detectors however this coil is now obsolete and there are not many left in stock. If you require one you will need to get in touch with your local dealer...
I hope this helps
Regards,
Trevor @ Coiltek.
Last edited by Coiltek Manufacturing on Sat Jun 01, 2013 11:34 am; edited 2 times in total
Coiltek Manufacturing- Good Contributor
- Number of posts : 100
Registration date : 2008-11-19
GT16000 Coils
****The GT16000 goes back about 20 years....but if my memory serves me correctly Coiltek put out a 15" coil called "all terrain".......give them a call or check with your local dealer.
Cheers.
sandy2010- Contributor Plus
- Number of posts : 821
Age : 83
Registration date : 2010-06-25
Re: GT16000 Coils
Sometime after the 16000 came out another Minelab detector was released called the Eureka Ace Duel Frequency. From memory the 16000 was 8 khz and the Duel Ace was 8 khz and 19 khz.
The coils were interchangeable between the 2 machines, so as well as the coils already mentioned here, two other coils that were available for the 16000 were the 6" round and the 12 x 6 elliptical.As to availability now, I`ve no idea
cheers dave
The coils were interchangeable between the 2 machines, so as well as the coils already mentioned here, two other coils that were available for the 16000 were the 6" round and the 12 x 6 elliptical.As to availability now, I`ve no idea
cheers dave
Guest- Guest
Similar topics
» GPX5000 Coils - What other coils to get
» old GT 16000
» Nuggetfinder Advantage coils --versus-- Coiltek Goldstalker coils
» xxxxxxxxxxxxxxxxxx
» Which coil!
» old GT 16000
» Nuggetfinder Advantage coils --versus-- Coiltek Goldstalker coils
» xxxxxxxxxxxxxxxxxx
» Which coil!
Gold Detecting and Prospecting Forum :: General :: All about Coils :: Coils - Minelab, Coiltek, General
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum